dmesg - GCC 9.0.1
Booting Linux on physical CPU 0x0000000000 [0x503f0001]
Linux version 4.20.6-200.fc29.aarch64 ([email protected]) (gcc version 8.2.1 20181215 (Red Hat 8.2.1-6) (GCC)) #1 SMP Thu Jan 31 15:29:26 UTC 2019
efi: Getting EFI parameters from FDT:
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0x9fffce0000 SMBIOS 3.0=0x9fffd6d498 ESRT=0x9ffad3d998 MEMRESERVE=0x9ff1adfe18
esrt: Reserving ESRT space from 0x0000009ffad3d998 to 0x0000009ffad3d9d0.
cma: Reserved 64 MiB at 0x00000000fb000000
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000009FFFCE0000 000024 (v02 ALASKA)
ACPI: XSDT 0x0000009FFFCE0028 000094 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x0000009FFFCE00C0 000114 (v06 Ampere eMAG 00000003 INTL 20171215)
ACPI: DSDT 0x0000009FFFCE01D8 007648 (v05 ALASKA A M I 00000001 INTL 20171215)
ACPI: FIDT 0x0000009FFFCE7820 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: DBG2 0x0000009FFFCE78C0 000061 (v00 Ampere eMAG 00000000 INTL 20171215)
ACPI: GTDT 0x0000009FFFCE7928 000108 (v02 Ampere eMAG 00000001 INTL 20171215)
ACPI: IORT 0x0000009FFFCE7A30 000ABC (v00 Ampere eMAG 00000000 INTL 20171215)
ACPI: MCFG 0x0000009FFFCE84F0 0000AC (v01 Ampere eMAG 00000001 INTL 20171215)
ACPI: SSDT 0x0000009FFFCE85A0 00002D (v02 Ampere eMAG 00000001 INTL 20171215)
ACPI: SPMI 0x0000009FFFCE85D0 000041 (v05 ALASKA A M I 00000000 AMI. 00000000)
ACPI: APIC 0x0000009FFFCE8618 000A68 (v04 Ampere eMAG 00000004 01000013)
ACPI: PCCT 0x0000009FFFCE9080 0005D0 (v01 Ampere eMAG 00000003 01000013)
ACPI: BERT 0x0000009FFFCE9650 000030 (v01 Ampere eMAG 00000003 INTL 20171215)
ACPI: HEST 0x0000009FFFCE9680 000328 (v01 Ampere eMAG 00000003 INTL 20171215)
ACPI: SPCR 0x0000009FFFCE99A8 000050 (v02 A M I APTIO V 01072009 AMI. 0005000D)
ACPI: PPTT 0x0000009FFFCE99F8 000CB8 (v01 Ampere eMAG 00000003 01000013)
ACPI: SPCR: console: pl011,mmio,0x12600000,115200
ACPI: NUMA: Failed to initialise from firmware
NUMA: Faking a node at [mem 0x0000000090000000-0x0000009fffffffff]
NUMA: NODE_DATA [mem 0x9ffff9b780-0x9ffffa8fff]
Zone ranges:
DMA32 [mem 0x0000000090000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000009fffffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000090000000-0x0000000091ffffff]
node 0: [mem 0x0000000092000000-0x00000000928bffff]
node 0: [mem 0x00000000928c0000-0x00000000fffaffff]
node 0: [mem 0x00000000fffb0000-0x00000000ffffffff]
node 0: [mem 0x0000000880000000-0x0000000fffffffff]
node 0: [mem 0x0000008800000000-0x0000009ff1a0ffff]
node 0: [mem 0x0000009ff1a10000-0x0000009ff1a4ffff]
node 0: [mem 0x0000009ff1a50000-0x0000009ff80affff]
node 0: [mem 0x0000009ff80b0000-0x0000009ff80bffff]
node 0: [mem 0x0000009ff80c0000-0x0000009ff81bffff]
node 0: [mem 0x0000009ff81c0000-0x0000009ff864ffff]
node 0: [mem 0x0000009ff8650000-0x0000009ff870ffff]
node 0: [mem 0x0000009ff8710000-0x0000009ff875ffff]
node 0: [mem 0x0000009ff8760000-0x0000009ffad15fff]
node 0: [mem 0x0000009ffad16000-0x0000009ffad2ffff]
node 0: [mem 0x0000009ffad30000-0x0000009ffad44fff]
node 0: [mem 0x0000009ffad45000-0x0000009ffad4dfff]
node 0: [mem 0x0000009ffad4e000-0x0000009ffad5ffff]
node 0: [mem 0x0000009ffad60000-0x0000009ffad6ffff]
node 0: [mem 0x0000009ffad70000-0x0000009ffae5ffff]
node 0: [mem 0x0000009ffae60000-0x0000009ffe1affff]
node 0: [mem 0x0000009ffe1b0000-0x0000009fffcaffff]
node 0: [mem 0x0000009fffcb0000-0x0000009fffcdffff]
node 0: [mem 0x0000009fffce0000-0x0000009fffceffff]
node 0: [mem 0x0000009fffcf0000-0x0000009fffd9ffff]
node 0: [mem 0x0000009fffda0000-0x0000009fffffffff]
Zeroed struct page in unavailable ranges: 915 pages
Initmem setup node 0 [mem 0x0000000090000000-0x0000009fffffffff]
On node 0 totalpages: 33488896
DMA32 zone: 7168 pages used for memmap
DMA32 zone: 0 pages reserved
DMA32 zone: 458752 pages, LIFO batch:63
Normal zone: 516096 pages used for memmap
Normal zone: 33030144 pages, LIFO batch:63
psci: probing for conduit method from ACPI.
psci: PSCIv1.0 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: Trusted OS migration not required
psci: SMC Calling Convention v1.0
ACPI: SRAT not present
percpu: Embedded 23 pages/cpu @(____ptrval____) s53784 r8192 d32232 u94208
pcpu-alloc: s53784 r8192 d32232 u94208 alloc=23*4096
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15
pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22 [0] 23
pcpu-alloc: [0] 24 [0] 25 [0] 26 [0] 27 [0] 28 [0] 29 [0] 30 [0] 31
Detected PIPT I-cache on CPU0
CPU features: detected: Kernel page table isolation (KPTI)
Built 1 zonelists, mobility grouping on. Total pages: 32965632
Policy zone: Normal
software IO TLB: mapped [mem 0xf7000000-0xfb000000] (64MB)
Memory: 131611460K/133955584K available (10428K kernel code, 1854K rwdata, 4488K rodata, 5376K init, 1082K bss, 2278588K reserved, 65536K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x3c/0x4d8 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 38315 entries in 150 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GICv3: GIC: Using split EOI/Deactivate mode
GICv3: Distributor has no Range Selector support
GICv3: no VLPI support, no direct LPI support
GICv3: CPU0: found redistributor 0 region 0:0x0000000078400000
ACPI: SRAT not present
ITS [mem 0x78020000-0x7803ffff]
ITS@0x0000000078020000: allocated 1048576 Devices @9ff7800000 (flat, esz 8, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
GICv3: using LPI property table @0x0000009ff7020000
GIC: using cache flushing for LPI property table
GICv3: CPU0: using allocated LPI pending table @0x0000009ff7030000
ACPI GTDT: found 1 memory-mapped timer block(s).
arch_timer: cp15 and mmio timer(s) running at 50.00MHz (phys/phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
Console: colour dummy device 80x25
ACPI: Core revision 20181003
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
SELinux: Initializing.
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
ASID allocator initialised with 32768 entries
rcu: Hierarchical SRCU implementation.
Platform MSI: ITS@0x78020000 domain created
PCI/MSI: ITS@0x78020000 domain created
Remapping and enabling EFI services.
smp: Bringing up secondary CPUs ...
Detected PIPT I-cache on CPU1
GICv3: CPU1: found redistributor 1 region 0:0x0000000078420000
GICv3: CPU1: using allocated LPI pending table @0x0000009ff7040000
CPU1: Booted secondary processor 0x0000000001 [0x503f0001]
Detected PIPT I-cache on CPU2
GICv3: CPU2: found redistributor 100 region 0:0x0000000078440000
GICv3: CPU2: using allocated LPI pending table @0x0000009ff7050000
CPU2: Booted secondary processor 0x0000000100 [0x503f0001]
Detected PIPT I-cache on CPU3
GICv3: CPU3: found redistributor 101 region 0:0x0000000078460000
GICv3: CPU3: using allocated LPI pending table @0x0000009ff7060000
CPU3: Booted secondary processor 0x0000000101 [0x503f0001]
Detected PIPT I-cache on CPU4
GICv3: CPU4: found redistributor 200 region 0:0x0000000078480000
GICv3: CPU4: using allocated LPI pending table @0x0000009ff7070000
CPU4: Booted secondary processor 0x0000000200 [0x503f0001]
Detected PIPT I-cache on CPU5
GICv3: CPU5: found redistributor 201 region 0:0x00000000784a0000
GICv3: CPU5: using allocated LPI pending table @0x0000009ff7080000
CPU5: Booted secondary processor 0x0000000201 [0x503f0001]
Detected PIPT I-cache on CPU6
GICv3: CPU6: found redistributor 300 region 0:0x00000000784c0000
GICv3: CPU6: using allocated LPI pending table @0x0000009ff7090000
CPU6: Booted secondary processor 0x0000000300 [0x503f0001]
Detected PIPT I-cache on CPU7
GICv3: CPU7: found redistributor 301 region 0:0x00000000784e0000
GICv3: CPU7: using allocated LPI pending table @0x0000009ff70a0000
CPU7: Booted secondary processor 0x0000000301 [0x503f0001]
Detected PIPT I-cache on CPU8
GICv3: CPU8: found redistributor 400 region 0:0x0000000078500000
GICv3: CPU8: using allocated LPI pending table @0x0000009ff70b0000
CPU8: Booted secondary processor 0x0000000400 [0x503f0001]
Detected PIPT I-cache on CPU9
GICv3: CPU9: found redistributor 401 region 0:0x0000000078520000
GICv3: CPU9: using allocated LPI pending table @0x0000009ff70c0000
CPU9: Booted secondary processor 0x0000000401 [0x503f0001]
Detected PIPT I-cache on CPU10
GICv3: CPU10: found redistributor 500 region 0:0x0000000078540000
GICv3: CPU10: using allocated LPI pending table @0x0000009ff70d0000
CPU10: Booted secondary processor 0x0000000500 [0x503f0001]
Detected PIPT I-cache on CPU11
GICv3: CPU11: found redistributor 501 region 0:0x0000000078560000
GICv3: CPU11: using allocated LPI pending table @0x0000009ff70e0000
CPU11: Booted secondary processor 0x0000000501 [0x503f0001]
Detected PIPT I-cache on CPU12
GICv3: CPU12: found redistributor 600 region 0:0x0000000078580000
GICv3: CPU12: using allocated LPI pending table @0x0000009ff70f0000
CPU12: Booted secondary processor 0x0000000600 [0x503f0001]
Detected PIPT I-cache on CPU13
GICv3: CPU13: found redistributor 601 region 0:0x00000000785a0000
GICv3: CPU13: using allocated LPI pending table @0x0000009ff7100000
CPU13: Booted secondary processor 0x0000000601 [0x503f0001]
Detected PIPT I-cache on CPU14
GICv3: CPU14: found redistributor 700 region 0:0x00000000785c0000
GICv3: CPU14: using allocated LPI pending table @0x0000009ff7110000
CPU14: Booted secondary processor 0x0000000700 [0x503f0001]
Detected PIPT I-cache on CPU15
GICv3: CPU15: found redistributor 701 region 0:0x00000000785e0000
GICv3: CPU15: using allocated LPI pending table @0x0000009ff7120000
CPU15: Booted secondary processor 0x0000000701 [0x503f0001]
Detected PIPT I-cache on CPU16
GICv3: CPU16: found redistributor 800 region 0:0x0000000078600000
GICv3: CPU16: using allocated LPI pending table @0x0000009ff7130000
CPU16: Booted secondary processor 0x0000000800 [0x503f0001]
Detected PIPT I-cache on CPU17
GICv3: CPU17: found redistributor 801 region 0:0x0000000078620000
GICv3: CPU17: using allocated LPI pending table @0x0000009ff7140000
CPU17: Booted secondary processor 0x0000000801 [0x503f0001]
Detected PIPT I-cache on CPU18
GICv3: CPU18: found redistributor 900 region 0:0x0000000078640000
GICv3: CPU18: using allocated LPI pending table @0x0000009ff7150000
CPU18: Booted secondary processor 0x0000000900 [0x503f0001]
Detected PIPT I-cache on CPU19
GICv3: CPU19: found redistributor 901 region 0:0x0000000078660000
GICv3: CPU19: using allocated LPI pending table @0x0000009ff7160000
CPU19: Booted secondary processor 0x0000000901 [0x503f0001]
Detected PIPT I-cache on CPU20
GICv3: CPU20: found redistributor a00 region 0:0x0000000078680000
GICv3: CPU20: using allocated LPI pending table @0x0000009ff7170000
CPU20: Booted secondary processor 0x0000000a00 [0x503f0001]
Detected PIPT I-cache on CPU21
GICv3: CPU21: found redistributor a01 region 0:0x00000000786a0000
GICv3: CPU21: using allocated LPI pending table @0x0000009ff7180000
CPU21: Booted secondary processor 0x0000000a01 [0x503f0001]
Detected PIPT I-cache on CPU22
GICv3: CPU22: found redistributor b00 region 0:0x00000000786c0000
GICv3: CPU22: using allocated LPI pending table @0x0000009ff7190000
CPU22: Booted secondary processor 0x0000000b00 [0x503f0001]
Detected PIPT I-cache on CPU23
GICv3: CPU23: found redistributor b01 region 0:0x00000000786e0000
GICv3: CPU23: using allocated LPI pending table @0x0000009ff71a0000
CPU23: Booted secondary processor 0x0000000b01 [0x503f0001]
Detected PIPT I-cache on CPU24
GICv3: CPU24: found redistributor c00 region 0:0x0000000078700000
GICv3: CPU24: using allocated LPI pending table @0x0000009ff71b0000
CPU24: Booted secondary processor 0x0000000c00 [0x503f0001]
Detected PIPT I-cache on CPU25
GICv3: CPU25: found redistributor c01 region 0:0x0000000078720000
GICv3: CPU25: using allocated LPI pending table @0x0000009ff71c0000
CPU25: Booted secondary processor 0x0000000c01 [0x503f0001]
Detected PIPT I-cache on CPU26
GICv3: CPU26: found redistributor d00 region 0:0x0000000078740000
GICv3: CPU26: using allocated LPI pending table @0x0000009ff71d0000
CPU26: Booted secondary processor 0x0000000d00 [0x503f0001]
Detected PIPT I-cache on CPU27
GICv3: CPU27: found redistributor d01 region 0:0x0000000078760000
GICv3: CPU27: using allocated LPI pending table @0x0000009ff71e0000
CPU27: Booted secondary processor 0x0000000d01 [0x503f0001]
Detected PIPT I-cache on CPU28
GICv3: CPU28: found redistributor e00 region 0:0x0000000078780000
GICv3: CPU28: using allocated LPI pending table @0x0000009ff71f0000
CPU28: Booted secondary processor 0x0000000e00 [0x503f0001]
Detected PIPT I-cache on CPU29
GICv3: CPU29: found redistributor e01 region 0:0x00000000787a0000
GICv3: CPU29: using allocated LPI pending table @0x0000009ff7200000
CPU29: Booted secondary processor 0x0000000e01 [0x503f0001]
Detected PIPT I-cache on CPU30
GICv3: CPU30: found redistributor f00 region 0:0x00000000787c0000
GICv3: CPU30: using allocated LPI pending table @0x0000009ff7210000
CPU30: Booted secondary processor 0x0000000f00 [0x503f0001]
Detected PIPT I-cache on CPU31
GICv3: CPU31: found redistributor f01 region 0:0x00000000787e0000
GICv3: CPU31: using allocated LPI pending table @0x0000009ff7220000
CPU31: Booted secondary processor 0x0000000f01 [0x503f0001]
smp: Brought up 1 node, 32 CPUs
SMP: Total of 32 processors activated.
CPU features: detected: GIC system register CPU interface
CPU features: detected: 32-bit EL0 Support
CPU features: detected: CRC32 instructions
CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes)
pinctrl core: initialized pinctrl subsystem
SMBIOS 3.1.1 present.
DMI: AmpereComputing(R) OSPREY EV-883832-X3-0001/OSPREY, BIOS 4.8.19 09/25/2018
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
Detected 16 PCC Subspaces
Registering PCC driver as Mailbox controller
vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
DMA: preallocated 256 KiB pool for atomic allocations
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: Using GIC for interrupt routing
ACPI: MCFG table detected, 8 entries
HEST: Table parsing has been initialized.
ARMH0011:00: ttyAMA0 at MMIO 0x12600000 (irq = 291, base_baud = 0) is a SBSA
printk: console [ttyAMA0] enabled
ARMH0011:01: ttyAMA1 at MMIO 0x12610000 (irq = 292, base_baud = 0) is a SBSA
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: ECAM area [mem 0x10000000000-0x1000fffffff] reserved by PNP0C02:00
acpi PNP0A08:00: ECAM at [mem 0x10000000000-0x1000fffffff] for [bus 00-ff]
Remapped I/O 0x0000010010000000 to [io 0x0000-0xffff window]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x10030000000-0x100efffffff window] (bus address [0x30000000-0xefffffff])
pci_bus 0000:00: root bus resource [mem 0x10100000000-0x17fffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [10e8:e004] type 01 class 0x060400
pci 0000:00:00.0: enabling Extended Tags
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PCI bridge to [bus 01]
ACPI: PCI Root Bridge [PCI2] (domain 0002 [bus 00-ff])
acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:02: _OSC: platform does not support [LTR]
acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:02: ECAM area [mem 0x1000000000-0x100fffffff] reserved by PNP0C02:00
acpi PNP0A08:02: ECAM at [mem 0x1000000000-0x100fffffff] for [bus 00-ff]
Remapped I/O 0x0000001010000000 to [io 0x10000-0x1ffff window]
PCI host bridge to bus 0002:00
pci_bus 0002:00: root bus resource [io 0x10000-0x1ffff window] (bus address [0x0000-0xffff])
pci_bus 0002:00: root bus resource [mem 0x1030000000-0x10efffffff window] (bus address [0x30000000-0xefffffff])
pci_bus 0002:00: root bus resource [mem 0x1100000000-0x57ffffffff window]
pci_bus 0002:00: root bus resource [bus 00-ff]
pci 0002:00:00.0: [10e8:e004] type 01 class 0x060400
pci 0002:00:00.0: enabling Extended Tags
pci 0002:00:00.0: supports D1 D2
pci 0002:00:00.0: PCI bridge to [bus 01]
ACPI: PCI Root Bridge [PCI4] (domain 0004 [bus 00-ff])
acpi PNP0A08:04: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:04: _OSC: platform does not support [LTR]
acpi PNP0A08:04: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:04: ECAM area [mem 0x6000000000-0x600fffffff] reserved by PNP0C02:00
acpi PNP0A08:04: ECAM at [mem 0x6000000000-0x600fffffff] for [bus 00-ff]
Remapped I/O 0x0000006010000000 to [io 0x20000-0x2ffff window]
PCI host bridge to bus 0004:00
pci_bus 0004:00: root bus resource [io 0x20000-0x2ffff window] (bus address [0x0000-0xffff])
pci_bus 0004:00: root bus resource [mem 0x6030000000-0x60efffffff window] (bus address [0x30000000-0xefffffff])
pci_bus 0004:00: root bus resource [mem 0x6100000000-0x6fffffffff window]
pci_bus 0004:00: root bus resource [bus 00-ff]
pci 0004:00:00.0: [10e8:e004] type 01 class 0x060400
pci 0004:00:00.0: enabling Extended Tags
pci 0004:00:00.0: supports D1 D2
pci 0004:00:00.0: PCI bridge to [bus 01]
ACPI: PCI Root Bridge [PCI6] (domain 0006 [bus 00-ff])
acpi PNP0A08:06: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:06: _OSC: platform does not support [LTR]
acpi PNP0A08:06: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:06: ECAM area [mem 0x600000000-0x60fffffff] reserved by PNP0C02:00
acpi PNP0A08:06: ECAM at [mem 0x600000000-0x60fffffff] for [bus 00-ff]
Remapped I/O 0x0000000610000000 to [io 0x30000-0x3ffff window]
PCI host bridge to bus 0006:00
pci_bus 0006:00: root bus resource [io 0x30000-0x3ffff window] (bus address [0x0000-0xffff])
pci_bus 0006:00: root bus resource [mem 0x630000000-0x6efffffff window] (bus address [0x30000000-0xefffffff])
pci_bus 0006:00: root bus resource [mem 0x700000000-0x7ffffffff window]
pci_bus 0006:00: root bus resource [bus 00-ff]
pci 0006:00:00.0: [10e8:e004] type 01 class 0x060400
pci 0006:00:00.0: enabling Extended Tags
pci 0006:00:00.0: supports D1 D2
pci 0006:01:00.0: [8086:1533] type 00 class 0x020000
pci 0006:01:00.0: reg 0x10: [mem 0x630100000-0x6301fffff]
pci 0006:01:00.0: reg 0x1c: [mem 0x630200000-0x630203fff]
pci 0006:01:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref]
pci 0006:01:00.0: PME# supported from D0 D3hot D3cold
pci 0006:00:00.0: BAR 14: assigned [mem 0x630000000-0x6302fffff]
pci 0006:01:00.0: BAR 0: assigned [mem 0x630000000-0x6300fffff]
pci 0006:01:00.0: BAR 6: assigned [mem 0x630100000-0x6301fffff pref]
pci 0006:01:00.0: BAR 3: assigned [mem 0x630200000-0x630203fff]
pci 0006:00:00.0: PCI bridge to [bus 01]
pci 0006:00:00.0: bridge window [mem 0x630000000-0x6302fffff]
ACPI: PCI Root Bridge [PCI7] (domain 0007 [bus 00-ff])
acpi PNP0A08:07: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:07: _OSC: platform does not support [LTR]
acpi PNP0A08:07: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:07: ECAM area [mem 0x400000000-0x40fffffff] reserved by PNP0C02:00
acpi PNP0A08:07: ECAM at [mem 0x400000000-0x40fffffff] for [bus 00-ff]
Remapped I/O 0x0000000410000000 to [io 0x40000-0x4ffff window]
PCI host bridge to bus 0007:00
pci_bus 0007:00: root bus resource [io 0x40000-0x4ffff window] (bus address [0x0000-0xffff])
pci_bus 0007:00: root bus resource [mem 0x430000000-0x4efffffff window] (bus address [0x30000000-0xefffffff])
pci_bus 0007:00: root bus resource [mem 0x500000000-0x5ffffffff window]
pci_bus 0007:00: root bus resource [bus 00-ff]
pci 0007:00:00.0: [10e8:e004] type 01 class 0x060400
pci 0007:00:00.0: enabling Extended Tags
pci 0007:00:00.0: supports D1 D2
pci 0007:01:00.0: [1a03:1150] type 01 class 0x060400
pci 0007:01:00.0: enabling Extended Tags
pci 0007:01:00.0: supports D1 D2
pci 0007:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci_bus 0007:02: extended config space not accessible
pci 0007:02:00.0: [1a03:2000] type 00 class 0x030000
pci 0007:02:00.0: reg 0x10: [mem 0x430000000-0x430ffffff]
pci 0007:02:00.0: reg 0x14: [mem 0x431040000-0x43105ffff]
pci 0007:02:00.0: reg 0x18: [io 0x10000000-0x1000007f]
pci 0007:02:00.0: reg 0x30: [mem 0x431000000-0x43103ffff pref]
pci 0007:02:00.0: BAR 0: assigned to efifb
pci 0007:02:00.0: supports D1 D2
pci 0007:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0007:00:00.0: BAR 14: assigned [mem 0x430000000-0x4317fffff]
pci 0007:00:00.0: BAR 13: assigned [io 0x40000-0x40fff]
pci 0007:01:00.0: BAR 14: assigned [mem 0x430000000-0x4317fffff]
pci 0007:01:00.0: BAR 13: assigned [io 0x40000-0x40fff]
pci 0007:02:00.0: BAR 0: assigned [mem 0x430000000-0x430ffffff]
pci 0007:02:00.0: BAR 6: assigned [mem 0x431000000-0x43103ffff pref]
pci 0007:02:00.0: BAR 1: assigned [mem 0x431040000-0x43105ffff]
pci 0007:02:00.0: BAR 2: assigned [io 0x40000-0x4007f]
pci 0007:01:00.0: PCI bridge to [bus 02]
pci 0007:01:00.0: bridge window [io 0x40000-0x40fff]
pci 0007:01:00.0: bridge window [mem 0x430000000-0x4317fffff]
pci 0007:00:00.0: PCI bridge to [bus 01-02]
pci 0007:00:00.0: bridge window [io 0x40000-0x40fff]
pci 0007:00:00.0: bridge window [mem 0x430000000-0x4317fffff]
pci 0007:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0007:02:00.0: vgaarb: bridge control possible
pci 0007:02:00.0: vgaarb: setting as boot device (VGA legacy resources not available)
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0x10000000000-0x1000fffffff window] could not be reserved
system 00:00: [mem 0x7800000000-0x780fffffff window] has been reserved
system 00:00: [mem 0x7000000000-0x700fffffff window] has been reserved
system 00:00: [mem 0x6000000000-0x600fffffff window] could not be reserved
system 00:00: [mem 0x5800000000-0x580fffffff window] has been reserved
system 00:00: [mem 0x1000000000-0x100fffffff window] could not be reserved
system 00:00: [mem 0x600000000-0x60fffffff window] could not be reserved
system 00:00: [mem 0x400000000-0x40fffffff window] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 1 devices
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 20480K
hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available
kvm [1]: 8-bit VMID
kvm [1]: IPA Size Limit: 42bits
kvm [1]: GICv3: no GICV resource entry
kvm [1]: disabling GICv2 emulation
kvm [1]: GIC system register CPU interface enabled
kvm [1]: vgic interrupt IRQ1
kvm [1]: Hyp mode initialized successfully
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=37 max_order=25 bucket_order=0
zbud: loaded
alg: No test for 842 (842-generic)
alg: No test for 842 (842-scomp)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
atomic64_test: passed
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0x430000000, using 1876k, total 1875k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
EDAC MC0: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT)
GHES: APEI firmware first mode is enabled by APEI bit.
ACPI GTDT: found 1 SBSA generic Watchdog(s).
arm-smmu arm-smmu.0.auto: probing hardware configuration...
arm-smmu arm-smmu.0.auto: SMMUv2 with:
arm-smmu arm-smmu.0.auto: stage 2 translation
arm-smmu arm-smmu.0.auto: coherent table walk
arm-smmu arm-smmu.0.auto: (IDR0.CTTW overridden by FW configuration)
arm-smmu arm-smmu.0.auto: stream matching with 128 register groups
arm-smmu arm-smmu.0.auto: 128 context banks (128 stage-2 only)
arm-smmu arm-smmu.0.auto: Supported page sizes: 0x60211000
arm-smmu arm-smmu.0.auto: Stage-2: 48-bit IPA -> 48-bit PA
arm-smmu arm-smmu.1.auto: probing hardware configuration...
arm-smmu arm-smmu.1.auto: SMMUv2 with:
arm-smmu arm-smmu.1.auto: stage 2 translation
arm-smmu arm-smmu.1.auto: coherent table walk
arm-smmu arm-smmu.1.auto: (IDR0.CTTW overridden by FW configuration)
arm-smmu arm-smmu.1.auto: stream matching with 128 register groups
arm-smmu arm-smmu.1.auto: 128 context banks (128 stage-2 only)
arm-smmu arm-smmu.1.auto: Supported page sizes: 0x60211000
arm-smmu arm-smmu.1.auto: Stage-2: 48-bit IPA -> 48-bit PA
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial_generic
mousedev: PS/2 mouse device common for all mice
[Firmware Bug]: register x18 corrupted by EFI get_time
[Firmware Bug]: register x18 corrupted by EFI get_time
rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: [email protected]
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
xgene-pmu APMC0D83:00: X-Gene PMU version 3
xgene-pmu APMC0D83:00: l3c0 PMU registered
xgene-pmu APMC0D83:00: l3c1 PMU registered
xgene-pmu APMC0D83:00: l3c2 PMU registered
xgene-pmu APMC0D83:00: l3c3 PMU registered
xgene-pmu APMC0D83:00: l3c4 PMU registered
xgene-pmu APMC0D83:00: l3c5 PMU registered
xgene-pmu APMC0D83:00: l3c6 PMU registered
xgene-pmu APMC0D83:00: l3c7 PMU registered
xgene-pmu APMC0D83:00: mcb0 PMU registered
xgene-pmu APMC0D83:00: mcb1 PMU registered
xgene-pmu APMC0D83:00: mc0 PMU registered
xgene-pmu APMC0D83:00: mc1 PMU registered
xgene-pmu APMC0D83:00: mc2 PMU registered
xgene-pmu APMC0D83:00: mc3 PMU registered
xgene-pmu APMC0D83:00: mc4 PMU registered
xgene-pmu APMC0D83:00: mc5 PMU registered
xgene-pmu APMC0D83:00: mc6 PMU registered
xgene-pmu APMC0D83:00: mc7 PMU registered
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: a720ed8441336acf5d6c107733cfa031f7b0cf98'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
iommu: Adding device 0000:00:00.0 to group 0
pcieport 0000:00:00.0: Signaling PME with IRQ 301
aer 0000:00:00.0:pcie002: AER enabled with IRQ 301
iommu: Adding device 0002:00:00.0 to group 1
pcieport 0002:00:00.0: Signaling PME with IRQ 302
aer 0002:00:00.0:pcie002: AER enabled with IRQ 302
iommu: Adding device 0004:00:00.0 to group 2
pcieport 0004:00:00.0: Signaling PME with IRQ 303
aer 0004:00:00.0:pcie002: AER enabled with IRQ 303
iommu: Adding device 0006:00:00.0 to group 3
pcieport 0006:00:00.0: Signaling PME with IRQ 304
aer 0006:00:00.0:pcie002: AER enabled with IRQ 304
iommu: Adding device 0007:00:00.0 to group 4
pcieport 0007:00:00.0: Signaling PME with IRQ 305
aer 0007:00:00.0:pcie002: AER enabled with IRQ 305
iommu: Adding device 0007:01:00.0 to group 5
[Firmware Bug]: register x18 corrupted by EFI get_time
rtc-efi rtc-efi: setting system clock to 2019-02-08 23:17:30 UTC (1549667850)
Freeing unused kernel memory: 5376K
Checked W+X mappings: passed, no W+X pages found
rodata_test: all tests were successful
Run /init as init process
systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture arm64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Swap.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on udev Control Socket.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Timers.
systemd[1]: Reached target Local File Systems.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Audit Socket.
audit: type=1130 audit(1549667858.980:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549667859.030:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549667859.110:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549667859.200:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1549667859.200:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549667859.320:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549667859.400:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549667859.560:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
xhci-hcd 808622B7:00: xHCI Host Controller
xhci-hcd 808622B7:00: new USB bus registered, assigned bus number 1
ahci APMC0D33:00: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
xgene-slimpro-i2c APMC0D40:00: Mailbox I2C Adapter registered
xgene-slimpro-i2c APMC0D40:01: Mailbox I2C Adapter registered
xhci-hcd 808622B7:00: hcc params 0x0220fe6d hci version 0x110 quirks 0x0000000020010010
ahci APMC0D33:00: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sadm sds apst
scsi host0: ahci
xhci-hcd 808622B7:00: irq 295, io mem 0x13800000
scsi host1: ahci
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
iommu: Adding device 0006:01:00.0 to group 6
ata1: SATA max UDMA/133 mmio [mem 0x1c000000-0x1c000fff] port 0x100 irq 293
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
ata2: SATA max UDMA/133 mmio [mem 0x1c000000-0x1c000fff] port 0x180 irq 293
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.20.6-200.fc29.aarch64 xhci-hcd
usb usb1: SerialNumber: 808622B7:00
hub 1-0:1.0: USB hub found
ahci APMC0D33:01: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
pps pps0: new PPS source ptp0
igb 0006:01:00.0: added PHC on eth0
igb 0006:01:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0006:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:1b:21:de:8c:b6
igb 0006:01:00.0: eth0: PBA No: G69016-005
igb 0006:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
hub 1-0:1.0: 1 port detected
igb 0006:01:00.0 enP6p1s0: renamed from eth0
ahci APMC0D33:01: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sadm sds apst
xhci-hcd 808622B7:00: xHCI Host Controller
scsi host2: ahci
xhci-hcd 808622B7:00: new USB bus registered, assigned bus number 2
scsi host3: ahci
xhci-hcd 808622B7:00: Host supports USB 3.0 SuperSpeed
ata3: SATA max UDMA/133 mmio [mem 0x1c100000-0x1c100fff] port 0x100 irq 294
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
ata4: SATA max UDMA/133 mmio [mem 0x1c100000-0x1c100fff] port 0x180 irq 294
iommu: Adding device 0007:02:00.0 to group 5
checking generic (430000000 1d5000) vs hw (430000000 1000000)
fb0: switching to astdrmfb from EFI VGA
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.20.6-200.fc29.aarch64 xhci-hcd
usb usb2: SerialNumber: 808622B7:00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
ast 0007:02:00.0: enabling device (0002 -> 0003)
xhci-hcd 808622B7:01: xHCI Host Controller
[drm] Using P2A bridge for configuration
xhci-hcd 808622B7:01: new USB bus registered, assigned bus number 3
[drm] AST 2500 detected
[drm] Analog VGA only
[drm] dram MCLK=800 Mhz type=7 bus_width=16 size=01000000
[TTM] Zone kernel: Available graphics memory: 65851426 kiB
xhci-hcd 808622B7:01: hcc params 0x0220fe6d hci version 0x110 quirks 0x0000000020010010
xhci-hcd 808622B7:01: irq 296, io mem 0x13900000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.20.6-200.fc29.aarch64 xhci-hcd
usb usb3: SerialNumber: 808622B7:01
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd 808622B7:01: xHCI Host Controller
xhci-hcd 808622B7:01: new USB bus registered, assigned bus number 4
xhci-hcd 808622B7:01: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.20.6-200.fc29.aarch64 xhci-hcd
usb usb4: SerialNumber: 808622B7:01
hub 4-0:1.0: USB hub found
hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
audit: type=1130 audit(1549667860.250:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
ata1: SATA link down (SStatus 0 SControl 330)
[TTM] Initializing pool allocator
ata2: SATA link down (SStatus 0 SControl 330)
[TTM] Initializing DMA pool allocator
ata4: SATA link down (SStatus 0 SControl 330)
usb 1-1: new high-speed USB device number 2 using xhci-hcd
fbcon: Deferring console take-over
ast 0007:02:00.0: fb0: astdrmfb frame buffer device
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: LPM support broken, forcing max_power
ata3.00: supports DRM functions and may not be fully accessible
usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
ata3.00: ATA-11: Samsung SSD 860 PRO 256GB, RVM01B6Q, max UDMA/133
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[drm] Initialized ast 0.1.0 20120228 for 0007:02:00.0 on minor 0
ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32)
ata3.00: LPM support broken, forcing max_power
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: configured for UDMA/133
ahci APMC0D33:01: port does not support device sleep
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hub 1-1:1.0: USB hub found
ata3.00: Enabling discard_zeroes_data
hub 1-1:1.0: 4 ports detected
sda: sda1 sda2 sda3 sda4
audit: type=1130 audit(1549667860.720:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sda] supports TCG Opal
sd 2:0:0:0: [sda] Attached SCSI disk
random: fast init done
SGI XFS with ACLs, security attributes, scrub, no debug enabled
XFS (sda4): Mounting V5 Filesystem
XFS (sda4): Ending clean mount
usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
usb 1-1.1: New USB device found, idVendor=046b, idProduct=ff01, bcdDevice= 1.00
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: Virtual Hub
usb 1-1.1: Manufacturer: American Megatrends Inc.
usb 1-1.1: SerialNumber: serial
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 5 ports detected
usb 1-1.2: new high-speed USB device number 4 using xhci-hcd
usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.2: Product: USB 2.0 Hub
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 4 ports detected
usb 1-1.1.1: new high-speed USB device number 5 using xhci-hcd
usb 1-1.1.1: New USB device found, idVendor=046b, idProduct=ff20, bcdDevice= 1.00
usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1.1: Product: Virtual Cdrom Device
usb 1-1.1.1: Manufacturer: American Megatrends Inc.
usb 1-1.1.1: SerialNumber: AAAABBBBCCCC1
usb-storage 1-1.1.1:1.0: USB Mass Storage device detected
scsi host4: usb-storage 1-1.1.1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 1-1.2.4: new high-speed USB device number 6 using xhci-hcd
systemd-journald[500]: Received SIGTERM from PID 1 (systemd).
printk: systemd: 13 output lines suppressed due to ratelimiting
usb 1-1.2.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
usb 1-1.2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.2.4: Product: USB 2.0 Hub
hub 1-1.2.4:1.0: USB hub found
hub 1-1.2.4:1.0: 4 ports detected
usb 1-1.1.2: new high-speed USB device number 7 using xhci-hcd
usb 1-1.1.2: New USB device found, idVendor=046b, idProduct=ffb0, bcdDevice= 1.00
usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1.2: Product: Virtual Ethernet
usb 1-1.1.2: Manufacturer: American Megatrends Inc.
usb 1-1.1.2: SerialNumber: 1234567890
usb 1-1.2.4.1: new low-speed USB device number 8 using xhci-hcd
scsi 4:0:0:0: CD-ROM AMI Virtual CDROM0 1.00 PQ: 0 ANSI: 0 CCS
sr 4:0:0:0: [sr0] scsi-1 drive
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
usb 1-1.2.4.1: New USB device found, idVendor=04f2, idProduct=0833, bcdDevice= 2.30
usb 1-1.2.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.4.1: Product: USB Keyboard
usb 1-1.2.4.1: Manufacturer: CHICONY
usb 1-1.1.3: new high-speed USB device number 9 using xhci-hcd
input: CHICONY USB Keyboard as /devices/platform/808622B7:00/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.1/1-1.2.4.1:1.0/0003:04F2:0833.0001/input/input0
hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-808622B7:00-1.2.4.1/input0
input: CHICONY USB Keyboard System Control as /devices/platform/808622B7:00/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.1/1-1.2.4.1:1.1/0003:04F2:0833.0002/input/input1
usb 1-1.1.3: New USB device found, idVendor=046b, idProduct=ff31, bcdDevice= 1.00
usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1.3: Product: Virtual HardDisk Device
usb 1-1.1.3: Manufacturer: American Megatrends Inc.
usb 1-1.1.3: SerialNumber: AAAABBBBCCCC3
input: CHICONY USB Keyboard Consumer Control as /devices/platform/808622B7:00/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.1/1-1.2.4.1:1.1/0003:04F2:0833.0002/input/input2
input: CHICONY USB Keyboard as /devices/platform/808622B7:00/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.1/1-1.2.4.1:1.1/0003:04F2:0833.0002/input/input3
hid-generic 0003:04F2:0833.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-808622B7:00-1.2.4.1/input1
usb-storage 1-1.1.3:1.0: USB Mass Storage device detected
scsi host5: usb-storage 1-1.1.3:1.0
usb 1-1.2.4.2: new full-speed USB device number 10 using xhci-hcd
usb 1-1.2.4.2: New USB device found, idVendor=1038, idProduct=1378, bcdDevice= 0.98
usb 1-1.2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.4.2: Product: Kinzu V2 Gaming Mouse
usb 1-1.2.4.2: Manufacturer: SteelSeries
usb 1-1.1.4: new low-speed USB device number 11 using xhci-hcd
hid-generic 0003:1038:1378.0003: hiddev97,hidraw2: USB HID v1.11 Device [SteelSeries Kinzu V2 Gaming Mouse] on usb-808622B7:00-1.2.4.2/input0
input: SteelSeries Kinzu V2 Gaming Mouse as /devices/platform/808622B7:00/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.2/1-1.2.4.2:1.1/0003:1038:1378.0004/input/input4
hid-generic 0003:1038:1378.0004: input,hidraw3: USB HID v1.11 Mouse [SteelSeries Kinzu V2 Gaming Mouse] on usb-808622B7:00-1.2.4.2/input1
usb 1-1.1.4: New USB device found, idVendor=046b, idProduct=ff10, bcdDevice= 1.00
usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1.4: Product: Virtual Keyboard and Mouse
usb 1-1.1.4: Manufacturer: American Megatrends Inc.
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/platform/808622B7:00/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/0003:046B:FF10.0005/input/input5
hid-generic 0003:046B:FF10.0005: input,hidraw4: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-808622B7:00-1.1.4/input0
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/platform/808622B7:00/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/0003:046B:FF10.0006/input/input6
hid-generic 0003:046B:FF10.0006: input,hidraw5: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-808622B7:00-1.1.4/input1
scsi 5:0:0:0: Direct-Access AMI Virtual HDisk0 1.00 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] Attached SCSI removable disk
kauditd_printk_skb: 32 callbacks suppressed
audit: type=1404 audit(1549667866.290:44): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
SELinux: Class xdp_socket not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
audit: type=1403 audit(1549667866.890:45): auid=4294967295 ses=4294967295 lsm=selinux res=1
systemd[1]: Successfully loaded SELinux policy in 725.769ms.
systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 60.489ms.
systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture arm64.
systemd[1]: Set hostname to .
audit: type=1130 audit(1549667870.290:46): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Stopped Switch Root.
audit: type=1131 audit(1549667870.290:47): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549667870.340:48): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
audit: type=1131 audit(1549667870.340:49): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Stopped Journal Service.
audit: type=1130 audit(1549667870.420:50): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1549667870.420:51): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Starting Journal Service...
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
audit: type=1130 audit(1549667870.520:52): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1549667870.520:53): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Adding 4194300k swap on /dev/sda3. Priority:-2 extents:1 across:4194300k SSFS
systemd-journald[823]: Received request to flush runtime journal from PID 1
xgene-slimpro-hwmon APMC0D29:00: APM X-Gene SoC HW monitor driver registered
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
IPMI message handler: version 39.2
ACPI: Power Button [PWRB]
ipmi device interface
ipmi_si: IPMI System Interface driver
ipmi_si: Unable to find any System Interface(s)
ipmi_ssif: IPMI SSIF Interface driver
ipmi_ssif: Trying ACPI-specified SSIF interface at i2c address 0x10, adapter Synopsys DesignWare I2C adapter, slave address 0x20
sbsa-gwdt sbsa-gwdt.0: Initialized with 10s timeout @ 50000000 Hz, action=0.
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
ipmi_ssif i2c-APMC0D8A:00: IPMI message handler: Found new BMC (man_id: 0x0005b2, prod_id: 0x8840, dev_id: 0x20)
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
usbcore: registered new interface driver cdc_ether
rndis_host 1-1.1.2:1.0 usb0: register 'rndis_host' at usb-808622B7:00-1.1.2, RNDIS device, 8e:d2:36:33:5f:92
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver rndis_wlan
kauditd_printk_skb: 13 callbacks suppressed
audit: type=1130 audit(1549667871.600:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549667871.850:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1549667872.130:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549667872.170:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1549667872.170:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549667872.220:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1549667872.220:75): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549667872.440:76): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
IPv6: ADDRCONF(NETDEV_UP): enP6p1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enP6p1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
fbcon: Taking over console
Console: switching to colour frame buffer device 128x48
igb 0006:01:00.0 enP6p1s0: igb: enP6p1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enP6p1s0: link becomes ready
usb 1-1.1.3: reset high-speed USB device number 9 using xhci-hcd
usb 1-1.1.1: reset high-speed USB device number 5 using xhci-hcd
usb 1-1.1.1: reset high-speed USB device number 5 using xhci-hcd
TCP: request_sock_TCP: Possible SYN flooding on port 8088. Sending cookies. Check SNMP counters.
TCP: request_sock_TCP: Possible SYN flooding on port 8088. Sending cookies. Check SNMP counters.
TCP: request_sock_TCP: Possible SYN flooding on port 8088. Sending cookies. Check SNMP counters.
TCP: request_sock_TCP: Possible SYN flooding on port 8088. Sending cookies. Check SNMP counters.